GXR-LA210P

Powered line array

The GXR-LA210P is a high output, compact bi-amp line array module. Consists of 2 x 10” (2” voice coil) transducer with 1.4” exit throat driver.

The GXR-LA210P is a high output, compact bi-amp line array module. Consists of 2 x 10” (2” voice coil) transducer with 1.4” exit throat driver.

Depending on the configuration, the system is amplified with the GTX Series, 4-channel, extremely high power level amplifiers with outstanding, high efficiency.

Advanced Audio Power Control Management has been implemented in the design of the GTX series. This enables the user to configure the division of power between the channels via the DSP enabling them to obtain maximum power through just one single channel if desired. Optional Networking AES67 and AES3 Digital inputs are also available.

Perfectly suited for:

Outdoor events
Houses of worship
Auditoriums
Large stadiums / arenas
Interior live PA
Theatres

Transducers: 2 x 10″ (2″ voice coil) LF speakers & 1.4″ titanium diaphragm HF driver.
Acoustics: 74 Hz – 19 kHz frequency range with 136 dB Peak SPL.
Malt Cross: Advanced cooling technology to minimize power compression.
Precision Coverage: Defined 100° H x 10° V coverage for accurate audience mapping.
Build: 15 mm birch plywood enclosure finished with high-resistance polyurea.
Hardware: Integrated steel rigging system with splay angles from 0° to 10°.

Components

LF: 10”, 2” voice coil, Malt Cross Cooling System
HF: 1.4” Exit throat, 3” voice coil with titanium diaphragm

Frequency Range

55 Hz – 20 KHz (-10dB)

Frequency Response

65 Hz – 18 KHz (± 3dB)

Sensitivity

LF: 99 dB
HF: 109 dB

Max. SPL / Peak*

LF: 127 dB / 133 dB
HF: 128 dB / 134 dB

Rated Power

LF: 600W AES, 1200W program, 2400W peak
HF: 80W AES, 160W program, 320W peak

Coverage

H: 100ºV: depending number cabinets of array

Crossover

Electronic FIR filters linear phase

Nominal Impedance

Low 8 Ω

High 16 Ω

Connectors

2 x Neutrik NL4

Finish

Polyurea coating

Material

15 mm premium birch plywood

Dimensions

299 x 790 x 436 mm (H x W x D)

Weight

29 Kg (63.9 lbs)

*Calculated maximum SPL based on rated peak power and measured sensitivity.

More features

Hardware for GXR-LA210P

Enclosure

The GXR-LA210P cabinet is constructed from 11-ply premium birch plywood (15mm thickness) and finished with high-resistant water based black paint.

Internal design

The internal structure of the GXR-LA210P is heavily braced for greater longevity and all parts are assembled on metal inserts with metric screws.

Grill

The GXR-LA210P has a heavy duty, powder coated front grille with a special acoustic rear fabric to protect the transducers against dust and dirt.

Handles

Two handles are located on each side of the GXR-LA210P enclosure to facilitate transport, positioning and loading of the cabinets.

Rigging

Built-in flying points are located on each side of the enclosure, to link the cabinets together. The rear pannel integrates the flying hardware in order to splay angles, from between 0° to 10° with 1° step increments to create the desired curve.

Transport

The cabinet is easy to transport thanks to its dedicated dolly and a protective nylon cover is also available to protect the enclosure and keep it clean on tour.

Accesories for GXR-LA210P