Search
Close this search box
Categories
Line Arrays
Line Source
Stage monitors
Subwoofers
Commercial Audio
Column speakers
Point Source
Processors
Amplifiers
Software
SERIES
CLS Series
CPS Series
LAIA Series
GXR Series
CXA Series
ADP Series
DS Series
HR Series
KR Series
BS Series
QB Series
Ionic Series
WCX Series
ROX Series
Juno Series
IXP Series
CS Series
Support
Downloads
Software
Technical
documents
SAT
Delisted products
Lynx Pro Audio > CPS SERIES

CPS SERIES

Coaxial Point Source

The CPS (Coaxial Point Source) Series is our high-power point source system.

This series includes five full-range cabinets, two of which are ultra-compact passive models, along with two subwoofer units, the CPS-18S, a new subwoofer, the CPS-F10S, and a stage monitor, the CSM-210 completes the series. Extreme care has been taken in selecting and customizing the most advanced components available, featuring coaxial mid/high drivers, along with full electronic synergy through the integration of system amplification and DSP technology.

Total system control is achieved through our 3D prediction software (Rainbow 3D), which works in tandem with our remote system management platform (OCS). These cutting-edge software tools, combined with CPS technology, provide the most optimal and precise listening experience for every listener in the audience.

Suitable for:

  • Outdoor events
  • Large stadiums / arenas
  • Houses of worship
  • Theaters
  • Auditoriums
  • Clubs

CPS-214 (64 / 96)

2 x 14″ + 1 x 2″ dual diaphragm coaxial driver, 6000W Class D
ACTIVE
PASSIVE

CPS-210 (64 / 96)

2 x 10″ + 1 x 1.4″ coaxial driver, 3000W Class D
ACTIVE
PASSIVE

CPS-14 (64 / 96)

1 x 14″ + 1 x 1.4″ coaxial driver, 3000W Class D
ACTIVE
PASSIVE

CPS-5

1 x 5″ passive coaxial speaker , 150 W, 120 dB SPL
ACTIVE
PASSIVE

CPS-4

1 x 4″ passive coaxial speaker, 100 W, 112 dB SPL
ACTIVE
PASSIVE

CPS-18S

1 x 18″ transducer, 3000 W Class D, 132 dB SPL
ACTIVE
PASSIVE

CPS-F10S

1 x 10″ + 2’5 voice coil, 600 W, 119 dB SPL
ACTIVE
PASSIVE

CSM-210

2 x 10″ + 1.4″ coaxial driver, 3000W Class D 131 dB SPL
ACTIVE
DSP

Digital processing

Active models have a DSP integrated into each cabinet. This DSP, with double precision filters, 64bit internal processing and double dynamics (RMS & Peak) optimizes all the system components and electronics, providing maximum system efficiency and total protection whilst significantly and noticeably lowering distortion.

Self-powered

Active CPS cabinets include class D amplification, with switching power supply. The integrated amplification far exceeds the transducers’ needs thus resulting in high output, high damping factor and extremely low levels of distortion.

They are also equipped with energy saving PFC (Power Factor Correction). The power supply regulates itself when AC mains change, so the amp power output will not change with mains swinging. It reduces the current draw in 40% approximately.

Online control

Online system (Ethernet or PC) to control each cabinet in real time.