LAIA-210

DSP integrated coaxial line array

High Output, self powered (class D switch mode power supply with PFC), line array element. It consists of a 2 x 10” (2” voice coil) transducer with 1.4” exit throat driver with waveguide system delivering 100ºH x 10ºV precise coverage. DSP (FIR technology) controlled with 2000W amplification, 138 dB peak.

The LAIA-210 enclosure is a medium format Line Array module that offers an ideal solution for a wide variety of indoor and outdoor applications where a compact, practical and reliable Line Array system is required. LAIA-210 is a self-powered 2-way system with a total of 2000W in class D, universal switching power supply and a PFC system for better optimization of input voltage and current and lower consumption. Equipped with a powerful next-generation 64-bit/96KHz DSP designed and manufactured by Lynx Pro Audio, it offers the most recent advances in digital processing, such as FIR filters, which offer linear frequency and phase response.

The latest 32-bit/96KHZ AD/DA converters make the system one of the most advanced and innovative line arrays on the market, resulting in superior sound quality. Additionally, LAIA series systems can be controlled remotely using the OCS control platform, giving the user the ability to control the systems without the need for external processors.

Perfectly suited for:

Outdoor events
Theatres
Large stadiums / arenas
Auditoriums
Indoor live PA
Houses of worship

Class D Powered (bi-amplified)
Integrated Digital Processing
Internal temperature control
Electronic protection
FIR linear phase filtering
Online monitoring available
Two way active system

Components

LF: 2 x 10”, 2” voice coil, Tetracoil ultra linear motor
HF: 1 x 1.4” exit throat, (3” voice coil) with titanium diaphragm

Frequency Range

55 Hz – 20 KHz (-10 dB)

Frequency Response

65 Hz – 18 KHz (± 3dB)

Max SPL*

132dB / 138dB Peak

Coverage

100º H x 10 º V

Power

2000 W (4000 W peak) Class D with switching power supply & PFC
LF amplifier: 1 x 1600 W RMS, 1600 W peak
HF amplifier: 1 x 400 W RMS, 800 W peak

DSP Processing

96 KHz / 64 bit double-precision

Control

User control interface with 2.8” IPS screen and multifunction joystick controller

Control connections

USB (DSP programming) / Dual Ethernet port

Input

Analog BAL/UNBAL XLR, Digital AES/EBU (Optional)

AC power

90 – 264V. 50/60 Hz with PFC

AC connections

16A Neutrik powerCon true1 TOP with looping output

Finish

Polyurea coating, high grade resistant paint

Material

15 mm premium birch plywood

Dimensions

303 x 749 x 473 mm (H x W x D) without pins

Weight

30 Kg (66.13 lbs)

* Calculated maximum SPL based on rated peak power and measured sensitivity

More features

Hardware for LAIA-210

Enclosure

The LAIA-210 cabinet is constructed from 11-ply premium birch plywood (15mm thickness) and finished with polyurea coating

Internal design

The internal structure of the LAIA-210 is heavily braced for greater longevity and all parts are assembled on metal inserts with metric screws. The amplification modules & DSP are housed in a separate chamber to the drivers avoiding excessive heat & vibration, thus delivering greater efficiency and reliability.

Rear panel

The powder coated steel rear panel contains all connections and houses the LAIA-210 amplification modules and DSP, is easily accessible and housed separately from the drivers for increased reliability and efficiency

Grill

The LAIA-210 has a heavy duty, powder coated front grille with a special acoustic rear fabric to protect the transducers against dust and dirt.

Handles

The LAIA-210 has four ergonomic handles with firm internal grip to facilitate transport, positioning and loading of the cabinets. Two handles are placed at the rear of the cabinet and two L-shaped are located on the sides.

Rigging

The 3 point rigging system with 2 retractile levers and 1 centre/rear point enables up to 16 LAIA-210 cabinets to be flown in a single array with optional splay angles, from between 0° to 10° with 1° step increments to create the desired curve.

The system can also be rigged and angled in retracted position enabling a much easier set-up without the need to lift each cabinet individually.

Transport

The LAIA-210 is easy to transport thanks to its dedicated Dolly. The cabinets lock in 3 points on to the dolly and a protective nylon cover is also available to protect the enclosure and keep it clean on tour.

Accesories for LAIA-210

SV-LAIA210

Flying frame and stack for LAIA-210

ST-SVCLS/M20

Kit to connect SV-LAIA flying frame and M20 plate

CA-4LAIA210

Transport dolly for up to 4 LAIA-210

DSP configuration

DSP panel configuration

On the back pannel of the cabinet you will find the digital control area. From the compact joystick located below the screen you are able to configure the basic adjustment functions of the internal DSP.

Just move the joystick to select the icons on the left of the screen. You can enter into the following functions: Home, settings, folder, configuration and information. Please note that you must apply the desired configuration in each one cabinet and requires electrical power to work.

If changes are not made the display will automatically dim to avoid unnecessary light in situations where light is not wanted. To re-activate the light simply press the joystick.

The following screens are an example and may vary slightly for each cabinet.

HOME

On the main screen you can see the cabinet’s input and output:

• Input: You can see a vumeter with the input level and a clip signal.

• Output: You have a vumeter with the output level (0 dBu is the amp’s maximum level) You can check the compressor and control the dynamic activity.

SETTINGS

This panel allows you to change the gain, polarity, mute and the delay for the inputs.

You also have the possibility of putting a high pass, changing the type of filter, frequency and order.

FOLDER

The folder screen shows you the name of the preset and its description.

Using the joystick you can change the preset.

CONFIGURATION

This screen is to configurate Ethernet. You can choose automatic or manual.

You can also configure the screen saver.

And here you have the input selection. You can choose between analog or AES3 for channel 1 or channel 2.

INFORMATION

The last screen shows you some general information regarding the cabinet’s components.

Here you can see the cabinet model, its serial number, DSP firmware and hardware versions, amp module model with hardware version, as well as the accelerometer status.