HR-6
High performance, ultra-compact, full range, versatile sound reinforcement, 90º x 90º wide dispersion cabinet.
HR-6 is an ultra compact, light and very versatile passive enclosure specially designed for all types of installation projects, both indoors and outdoors (outdoor version available). It consists of a 6.5” transducer (impedance 16 ohm) and a 1” high frequency Mylar tweeter. It offers 119 dB SPL (400 W program)
It is an excellent solution for large installation projects or basic installations. It has a complete range of accessories to provide an easier installation.
Although this cabinet can be used without a processor, the best performance is achieved when using our presets, optimised for LUKA processors and GTX amplifiers. Please note that using the cabinet without our recommended processors or amplifiers may affect the product warranty.
For Low Frequency reinforcement, several subwoofer options are available.
Perfectly suited for:
- Club & bar installations
- Sound reinforcement
- Theatres
- Houses of worship
- Multi media spaces
- Public address
- Compact Performance: Two-way passive system delivering 200W RMS and 400W Program in an ultra-compact format.
- Precision Components: Features a 6.5″ transducer (1.5″ voice coil) and a 1″ compression driver with a PETP diaphragm.
- Acoustic Quality: 115 dB Max SPL with a frequency range from 60 Hz to 20 KHz.
- Controlled Dispersion: Rotatable 90º x 60º GFK horn, allowing for both vertical and horizontal placement.
- Durable Construction: Built from 12 mm premium birch plywood finished in high-resistance textured paint.
- Versatile Installation: Includes multiple M6 rigging points and a 35 mm pole mount, ideal for subtle sound reinforcement in theaters, clubs, and multimedia spaces.
- LF: 1 x 6.5″, 2″ voice coil
- HF: 1 x Tweeter 1″ – 1.25″ aluminium voice coil, Mylar diaphragm
62 Hz – 20 KHz (-10dB)
88 Hz – 18 KHz (± 3dB)
93 dB (1W@1m)
116 dB – 122 dB Peak
90º H x 90 º V
200 W (400 W program, 800 W peak)
Passive
16 Ω
2 x Neutrik Speakon NL4MP / 4 x Terminal Block 7.62 mm between pins
Polyurea coating
15 mm premium birch plywood
300 x 236 x 220 mm (H x W x D)
7.5 Kg (17 lbs)
More features
Hardware for HR-6
Accesories for HR-6
UBR-HR6
U bracket for HR-6
WB-10/2
Wall bracket for HR-6
AGR-6
M6 eye bolt for HR-6
Weather-resistant version
Our Weather-resistant version speakers are designed to withstand harder weather conditions, where the cabinets are exposed to the elements.
Colours:
- Black polyurea coating with microtextured metal parts.
- RAL available on request. Polyurea coating with aliphatic colour paint.
1. Anodized aluminium logo for durability outdoors.
2. Stainless steel 1 mm 316 L grill. Also available in aluminum with protective layer and micro textured paint.
3. Weatherstrip edging for extreme protection.
4. Acoustex filter: hydrophobic polyester sheet to prevent the penetration of water and external elements produced by extreme weather conditions.
5. 35 ppi Acoustic foam to protect against dust particles.
6. Waterproof protected cone on both sides
7. Aluminum back plate with pressure gland for an extra tight connection and easy installation.
8. M10 stainless steel 316 L screws (A4).
The HR-6 is also available as an outdoor version. The cabinets receive the following treatment so that they can be installed in outside locations:
– Micro perforated aluminum grill with special polyester protect from water.
– Tropicalized speaker treatment with special latex covering for water protection.
– Stainless steel screws
– Connection system with 2.5 meters of Oxygen-free cable 2 x 1.5mm with cable gland.
– Double polyurea coating.
Other products from this series
Other amplifiers
Subscribe to our newsletter and receive information about products, our latest facilities, and other news.
Official Sponsor
Copyright © LYNX PRO AUDIO
