HR-215S
HR-215S a high power, ultra compact, subwoofer cabinet with two 15” low frequency transducers with rubber suspension in triple band-pass configuration. 139dB Peak (4000W program).
The HR-215S is a high-performance compact subwoofer designed to work with the HR range full range cabinets, offering impressive low-frequency reinforcement with an excellent power-volume-to-weight ratio.
High power, ultra compact,sub-bass cabinet with two 15” low frequency transducers with rubber suspension in triple band-pass configuration. 139dB Peak (4000W program).
Although this cabinet can be used without a processor, the best performance is achieved when using our presets, optimised for LUKA processors and GTX amplifiers. Please note that using the cabinet without our recommended processors or amplifiers may affect the product warranty.
Perfectly suited for:
- Club & Bar installations
- Sound reinforcement
- Theatres
- Houses of worship
- Multi media spaces
- Public address
- Performance Power: Passive direct radiation system delivering 1600W AES (3200W Program / 6400W Peak).
- High-Quality Components: Features dual 15″ transducers with a 4″ voice coil for deep and defined bass response.
- Acoustic Performance: 133 dB Max SPL with a frequency range from 35 Hz to 250 Hz.
- Transient Response: Engineered to deliver fast and precise low-frequency reproduction with minimal distortion.
- Rugged Construction: Built from 18 mm premium birch plywood finished in high-resistance polyurea coating.
- Installation Versatility: Available in an Outdoor version and any RAL color upon request.
LF: 2 x 15′′ transducers
30 Hz – 160 Hz (-10dB)
35 Hz – 150 Hz (± 3dB)
100 dB (1W@1m) π
133 dB – 139 dB Peak
Quasi Omnidirectional
2000 W (4000 W program, 8000 W peak)
Active
8 Ω
2 x Neutrik Speakon NL4MP | LF1 1+/1- | LF2 2+/2-
Polyurea coating – other colours (RAL) available
18 mm premium birch plywood
644 x 463 x 600 mm (H x W x D)
59 Kg (130 lbs)
More features
Hardware for HR-215S
Enclosure
The HR-215S cabinet is constructed from 13-ply premium birch plywood (18mm thickness) and finished with polyurea coating.
Internal design
The internal structure of the HR-215S is heavily braced for greater longevity and all parts are assembled on metal inserts with metric screws.
Rear panel
A compact powder coated steel panel contains the connectors.
Accesories for HR-215S
TU-C01
35mm connecting pole for satellite combination between HR-215S and HR full range cabinets
TU-C02
M20 pole support combination between HR-215S and HR full range cabinets. With safety lock
VSM-V1
35mm speaker mounting top hat for satellite combination between HR-215S and HR full range cabinets
VSM-V2
M20 connector plate for the HR-215S
DSP configuration
DSP panel configuration
Weather-resistant version
Our weather-resistant version speakers are designed to withstand harder weather conditions, where the cabinets are exposed to the elements.
Colours:
- Black polyurea coating with microtextured metal parts.
- RAL available on request. Polyurea coating with aliphatic colour paint.
1. Anodized aluminium logo for durability outdoors.
2. Stainless steel 1 mm 316 L grill. Also available in aluminum with protective layer and micro textured paint.
3. Weatherstrip edging for extreme protection.
4. Acoustex filter: hydrophobic polyester sheet to prevent the penetration of water and external elements produced by extreme weather conditions.
5. 35 ppi Acoustic foam to protect against dust particles.
6. Waterproof protected cone on both sides
7. Aluminum back plate with pressure gland for an extra tight connection and easy installation.
8. M10 stainless steel 316 L screws (A4).
Other products from this series
Other amplifiers
Subscribe to our newsletter and receive information about products, our latest facilities, and other news.
Official Sponsor
Copyright © LYNX PRO AUDIO
