HR-18/10
Medium power, subwoofer cabinet with one 18” low frequency in bass reflex, direct radiation configuration. 129dB SPL (2000W Program).
The HR-18/10 is a compact subwoofer with a great power-volume-weight ratio. This cabinet is designed to work together with the full range units of the HR series, offering significant reinforcement for the low frequencies.
Medium power, subwoofer cabinet with one 18” low frequency in bass reflex, direct radiation configuration. 129B SPL (2000W Program)
Although this subwoofer can be used without a processor, the best performance is achieved when using our presets, optimised for LUKA processors and GTX amplifiers. Please note that using the cabinet without our recommended processors or amplifiers may affect the product warranty.
Perfectly suited for:
- Club & Bar installations
- Sound reinforcement
- Theatres
- Houses of worship
- Multi media spaces
- Public address
- Performance Power: Passive direct radiation system delivering 1000W AES (2000W Program / 4000W Peak).
- High-Quality Component: Features a single 18″ transducer with a 4″ voice coil for deep and defined bass response.
- Acoustic Performance: 129 dB Max SPL with a frequency range from 28 Hz to 250 Hz.
- Enclosure Design: Bass-reflex configuration optimized for precise low-frequency reproduction with minimal distortion.
- Rugged Construction: Built from 18 mm premium birch plywood finished in high-resistance polyurea coating.
- Installation Versatility: Available in an Outdoor version and any RAL color upon request for fixed installation projects.
1 x 18″, 3″ copper voice coil
40 Hz – 200 Hz (-10dB)
46 Hz – 200 Hz (± 3dB)
101 dB (1W@1m) π
129 dB – 135 dB Peak
Omnidirectional
1000 W (2000 W program, 4000 W peak)
Active
8 Ω
2 x Neutrik Speakon NL4MP
Polyurea coating – other colours (RAL) available
18 mm premium birch plywood
511 x 505 x 681 mm (H x W x D)
32 Kg (70.5 lbs)
More features
Hardware for HR-18/10
Enclosure
The HR-18/10 cabinet is constructed from 13-ply premium birch plywood (18mm thickness) and finished with polyurea coating.
Internal design
The internal structure of the HR-18/10 is heavily braced for greater longevity and all parts are assembled on metal inserts with metric screws.
Rear panel
A compact powder coated steel panel contains the connectors.
Grill
The HR-18/10 has a heavy duty, powder coated front grille with a special acoustic rear fabric to protect the transducers against dust and dirt.
Handles
An ergonomic handle is located on each side of the HR-18/10 enclosure to facilitate transport, positioning and loading of the cabinets
Accesories for HR-18/10
DSP configuration
DSP panel configuration
Weather-resistant version
Our weather-resistant version speakers are designed to withstand harder weather conditions, where the cabinets are exposed to the elements.
Colours:
- Black polyurea coating with microtextured metal parts.
- RAL available on request. Polyurea coating with aliphatic colour paint.
1. Anodized aluminium logo for durability outdoors.
2. Stainless steel 1 mm 316 L grill. Also available in aluminum with protective layer and micro textured paint.
3. Weatherstrip edging for extreme protection.
4. Acoustex filter: hydrophobic polyester sheet to prevent the penetration of water and external elements produced by extreme weather conditions.
5. 35 ppi Acoustic foam to protect against dust particles.
6. Waterproof protected cone on both sides
7. Aluminum back plate with pressure gland for an extra tight connection and easy installation.
8. M10 stainless steel 316 L screws (A4).
Other products from this series
Other amplifiers
Subscribe to our newsletter and receive information about products, our latest facilities, and other news.
Official Sponsor
Copyright © LYNX PRO AUDIO
