CPS-210P

Bi-amplified coaxial point source

Two models: CPS-210P/64 & CPS-210P/96
Extremely compact & powerful 3-way, bi-amplified coaxial point source element. Dual high power 10” neodymium transducers and a unique 1.4” Exit throat (HF 2” voice coil/ MF 3” voice coil) coaxial neodymium compression driver.

Two models depending on coverage: CPS-210P/64 (60ºH x 40ºV) or CPS-210P/96 (90ºH x 60ºV).

The CPS-210P is a high-output extremely compact and extremely powerful 3-way, bi-amplified, coaxial point source element designed for medium sized touring & fixed installations.

It uses two low distortion 10” (3” DUO double layer voice coil) speakers for the low frequencies with exclusive Malt Cross cooling technology, FEA optimized neodymium magnet circuit, aluminium demodulating ring and weatherproof cone.

For the mid/high frequencies it uses an ultra light weight 1.4” exit throat neodymium coaxial compression driver. The unique voice coil technology employs a light weight copper clad aluminium wire, wound inside and out of the Kapton former to improve heat dissipation, dramatically increasing the acoustic output and reliability of the driver while minimizes the power compression.

The larger annular midrange diaphragm covers the frequency range between 300Hz and 7KHz with a smooth, linear response. The ultra light annular diaphragm for the high frequencies offers exceptional transient response with very high efficiency from 4KHz to 22Khz. With two subsystems in one each driver covers a smaller frequency range for increased power handling, high dynamic and extremely low distortion and delivers excellent phase coherence & perfect time alignment without problems of multi-source interference.

The enclosure is made from premium grade birch plywood and finished with a polyurea coating for longer durability & weather protection.

Perfectly suited for:

Outdoor events
Medium sized stadiums / arenas
Auditoriums
Clubs
Theatres
Houses of worship

Extraordinary power-to-size ratio
Three-way active system
1.4” exit throat coaxial neodymium compression driver
Ergonomic design in premium birch plywood & finished in polyurea

Components

LF: 2 x 10” (3” voice coil), neodymium magnet, 1400W (AES).
MF: 3” (76mm) voice coil, 90W (AES).
HF: 2” (51 mm) voice coil, 50W (AES)

Frequency Range

63 Hz – 20 KHz (-6dB)

Coverage

Rotatable 60ºH x 40ºV / 90ºH x 60ºV

Max SPL*

Low: 130.5 dB / 136.5 dB
Mid/ High: 131 dB / 137 dB

Sensitivity

LF: 103 dB
MF/HF: 113 dB

Impedance

Low section: 8 Ω
Mid/high section: 16 Ω

Crossover

Mid/high: 4500 Hz
Low/mid: 600 Hz

Speakon connection

NL4MP +1/-1 Low, +2/-2 Mid/high

Finish

Polyurea coating, high grade resistant paint

Material

15 mm premium birch plywood

Dimensions

710 x 350 x 428 mm (H x W x D)

Weight

33 Kg (72.75 lbs)

* Calculated maximum SPL based on rated peak power and measured sensitivity.

More features

Hardware for CPS-210P

Enclosure

The CPS-210P cabinet is constructed from 11-ply premium birch plywood (15mm thickness) and finished with polyurea coating.

Internal design

The internal structure of the CPS-210P is heavily braced for greater longevity and all parts are assembled on metal inserts with metric screws.

Grill

The CPS-210P has three heavy duty, powder coated front grille with a special acoustic rear fabric to protect the transducers against dust and dirt. The medium frequencies grille uses a magnetic attachment system that can be removed for easy access and rotation of the diffuser.

Handles

The CPS-210P has six ergonomic handles with firm internal grip to facilitate transport, positioning and loading of the cabinets. Two handles are placed at the top and bottom of the cabinet and four handles at the sides, two on each side.

Accesories for CPS-210P